Thermal Fuse
FuseThermal fuseTemperatureOne-shot
One-shot, temperature-triggered thermal protection, widely used in appliances and battery packs.
A thermal fuse (thermal cutoff / thermal protector) is a temperature-triggered overcurrent device. When the set temperature is reached, it irreversibly opens the circuit.
Key characteristics
| Characteristic | Note |
|---|---|
| Action principle | Temperature reaches rated value → internal fusible alloy melts → permanent open |
| Non-resettable | Must be replaced after operation |
| Rated temperature | Common grades 72°C / 79°C / 85°C / 95°C / 105°C / 125°C |
| Rated current | mA to tens of A |
| Package | Disc, cartridge, leaded, SMD |
Typical applications
- Appliances (microwave, rice cooker, electric kettle) over-temperature protection
- Motor winding temperature protection
- Battery pack thermal-runaway protection
- Secondary protection inside adapters
Selection points
- Action temperature: leave headroom above the protected equipment's maximum allowed temperature
- Rated current: normal operating current ≤ rated current (usually 0.8× safety margin)
- Breaking capacity: match the upstream overcurrent device's fault current
- Mounting: direct-solder / lead / SMD, matched to PCB or wiring
- Certification: UL, VDE, CQC etc.
Difference from a regular fuse
A regular fuse triggers on current (overload/short); a thermal fuse triggers on temperature (over-heat). They are often used together as a "current + temperature" dual protection.
