Device Library
The full circuit-protection device catalog: overvoltage (SPD, MOV, TMOV, GDT, TVS, ESD), overcurrent (PPTC, Fuse), thermal & inrush (Inrush NTC/PTC). Each page covers principle, key parameters, selection, applications and failure modes.
ESD — Electrostatic Discharge Protector
Ultra-low-capacitance protector designed for human/machine static discharge; used on high-speed interfaces such as USB, HDMI and Ethernet.
GDT — Gas Discharge Tube
A switch-type protector with inert gas between electrodes; very high surge current and extremely low inter-electrode capacitance, the first-stage device for telecom and signal lines.
MOV — Metal Oxide Varistor
Zinc-oxide polycrystalline semiconductor with highly nonlinear V-I characteristics; the most common overvoltage clamping element in SPDs, power supplies and appliances.
SPD — Surge Protective Device
Shunt-connected overvoltage protector, classified as Type 1/2/3 by IEC 61643-11, typically built on MOV, GDT or a combination for clamping and diverting surges.
TMOV — Thermally Protected Varistor
A varistor with an integrated thermal disconnector and fault indicator, resolving the fire risk of thermal runaway in ordinary MOVs.
TVS — Transient Voltage Suppressor Diode
Avalanche-breakdown semiconductor protector with picosecond response and precise clamping; the preferred fine overvoltage protection for power rails and signal lines.
Fuse
One-shot overcurrent protector; the link melts and opens the circuit on short-circuit or severe overcurrent—the last line of overcurrent defense.
PPTC — Resettable Polyfuse
Polymeric positive-temperature-coefficient resettable protector; overcurrent heats it and resistance jumps to limit current, then it auto-resets on cooling.
