Circuit Protection
Devices & Solutions
From device physics and key parameters to selection and coordination — covering overvoltage, overcurrent and thermal protection, and explaining every trade-off behind circuit protection components.
Device Library
All devices →ESD — Electrostatic Discharge Protector
Ultra-low-capacitance protector designed for human/machine static discharge; used on high-speed interfaces such as USB, HDMI and Ethernet.
Read →Fuse
One-shot overcurrent protector; the link melts and opens the circuit on short-circuit or severe overcurrent—the last line of overcurrent defense.
Read →GDT — Gas Discharge Tube
A switch-type protector with inert gas between electrodes; very high surge current and extremely low inter-electrode capacitance, the first-stage device for telecom and signal lines.
Read →MOV — Metal Oxide Varistor
Zinc-oxide polycrystalline semiconductor with highly nonlinear V-I characteristics; the most common overvoltage clamping element in SPDs, power supplies and appliances.
Read →Domains
View all →Low-Voltage Surge-Protective MOV Selection & Application Principles — Selecting the Varistor
Per IEC 61643-332:2024 §7.1.4, the full seven sub-steps of varistor selection: MCOV, peak transient current, size/clamping, rated energy, power & TOV derating, and thermally-protected MOVs, with a 230 V / 1.25 kA worked example.
Low-Voltage Surge-Protective MOV Selection & Application Principles
Per IEC 61643-332:2024, the terms, definitions, symbols and abbreviations of metal oxide varistors (MOV), plus a walk-through of the three V-I regions that underpin varistor selection.
Applications
View all →Smart-Meter Surge Design: MOVTP Selection & Coordination
Smart meters connect straight to the mains, where lightning and inductive load-switching create transient overvoltages. A MOV with thermal-disconnect (MOVTP) is the common "clamp + auto-disconnect at end-of-life" choice — this piece walks through device physics, specs and coordination.
Automotive Electronics
12/24 V battery systems, CAN/LIN/automotive Ethernet and ECUs face load dump, battery reverse, and severe ESD; automotive-grade protection uses high-power TVS, bus ESD arrays, PPTC/fuse at the power entry and reverse-polarity protection.
Standards
View all →Type 3 Cord-Connected SPD — UL 1449 Test Deep-Dive
Item-by-item breakdown of Cord-Connected / Direct Plug-in Type 3 SPDs (surge-protected power strips / extension cords): spec definition, test criteria and a ready-to-use spec sheet under UL 1449 5th Edition.
Test Method for Inrush-Suppression NTC to UL 1434
Step-by-step breakdown of the seven cyclic / environmental tests, test-equipment setup, pass criteria and a printable record sheet for an inrush-suppression NTC (Vmax=240V / Imax=5A) under UL 1434:2021.
Latest notes
All notes →Varistor "Copper-for-Silver" Electrode: Silver-Price-Driven Process Migration and Cost–Reliability Trade-off
From silver electrodes and aluminum-underlayer + silver composite, to today's copper-for-silver — how the silver price rally is forcing an electrode material revolution, and a rigorous answer to "can copper really replace silver."
2026-10-24
A note on why this site exists, where the content comes from, and the principles it is written to.
Installation Mistakes I Have Seen
Ten field situations where the devices were fully compliant and the system was still destroyed by lightning. And the pattern running through all of them.
Why Your Equipment Died Despite a 20 kA SPD
A complete worked reasoning chain — from "the ratings check out" to "the equipment was destroyed" — and which step was actually missed.
Specifying protection for a product?
Send the power/signal interface, operating voltage, the overvoltage and overcurrent levels to be defended against, plus safety and space constraints — and we can work through a defensible device combination and coordination approach.
