SPD Tech Circuit Protection Devices & Solutions
中文

MOV — Typical Specifications

· 6 min
MOVVaristorZinc oxideClampSpecifications

Mainstream commercial specifications, package forms and selection reference for MOV.

Small disc (5/7/10 mm)

Small disc (5/7/10 mm)

Vn 18–275 V, low-current, appliance/signal ports, Ip hundreds of A.

02

Mid disc (14/20/25/32 mm)

Vn 275–620 V, distribution mainstream, In 5–20 kA.

03

High-energy (34/40/53 mm)

In 30–70 kA for entrance and large diversion.

04

Multilayer chip MLV

SMD down to 3.3 V for board power and signal.

MOVs are specified by disc size and nominal voltage: disc diameters 5 / 7 / 10 / 14 / 20 / 25 / 32 / 34 / 40 / 53 mm; nominal voltage 18 V–1800 V (AC-side common ratings 130 / 275 / 320 / 385 / 510 / 620 / 820 V); peak current Ip (8/20) from hundreds of amps to 70 kA (53 mm). Multilayer chip MLVs serve SMD needs down to 3.3 V for signal and power ports.

Dimension Typical range Note
Disc size 5–53 mm larger = more surge
Vn nominal 18–1800 V by protected line
Peak current 0.1–70 kA (8/20) set by disc
Clamp ratio Vc/Vn 1.5–2.2 lower is better
Package leaded disc / SMD MLV MLV for signal ports

MOVs are specified by disc size and nominal voltage: disc diameters 5 / 7 / 10 / 14 / 20 / 25 / 32 / 34 / 40 / 53 mm; nominal voltage 18 V–1800 V (AC-side common ratings 130 / 275 / 320 / 385 / 510 / 620 / 820 V); peak current Ip (8/20) from hundreds of amps to 70 kA (53 mm). Multilayer chip MLVs serve SMD needs down to 3.3 V for signal and power ports.

Dimension Typical range Note
Disc size 5–53 mm larger = more surge
Vn nominal 18–1800 V by protected line
Peak current 0.1–70 kA (8/20) set by disc
Clamp ratio Vc/Vn 1.5–2.2 lower is better
Package leaded disc / SMD MLV MLV for signal ports