SPD Tech Circuit Protection Devices & Solutions
中文

Inrush — Typical Specifications

· 6 min
NTCPTCInrushTurn-on surgeCurrent limitSpecifications

Mainstream commercial specifications, package forms and selection reference for Inrush.

Power NTC (disc/ring)

Power NTC (disc/ring)

Few to 100+ Ω, inrush suppression, 5–40 mm.

02

NTC temperature sensor

B 3000–10000, precision temp.

03

PTC resettable (battery/motor)

Trip 60–130 ℃, overheat & overcurrent.

04

Automotive wide-temp PTC

On-board charger & BMS.

Inrush NTCs are negative-temperature-coefficient power resistors, a few ohms to over 100 Ω at room temperature, used to suppress turn-on surge; disc/ring size (5–40 mm) is chosen by energy and current. PTC (positive-temperature-coefficient) self-resetting types limit current and protect against overheat in batteries/motors, with trip temperature 60–130 ℃.

Dimension Typical range Note
NTC resistance 1–100+ Ω @25℃ suppress turn-on surge
NTC energy few J–hundreds J by load
PTC trip temp 60–130 ℃ overheat/overcurrent
Form disc / ring / chip by power
Use PSU / motor / battery surge + current limit

Inrush NTCs are negative-temperature-coefficient power resistors, a few ohms to over 100 Ω at room temperature, used to suppress turn-on surge; disc/ring size (5–40 mm) is chosen by energy and current. PTC (positive-temperature-coefficient) self-resetting types limit current and protect against overheat in batteries/motors, with trip temperature 60–130 ℃.

Dimension Typical range Note
NTC resistance 1–100+ Ω @25℃ suppress turn-on surge
NTC energy few J–hundreds J by load
PTC trip temp 60–130 ℃ overheat/overcurrent
Form disc / ring / chip by power
Use PSU / motor / battery surge + current limit