PPTC — Typical Specifications
PPTCResettable fuseOvercurrentPolySwitchSpecifications
Mainstream commercial specifications, package forms and selection reference for PPTC.
Low hold (10–100 mA)
SMD 0402/0603, board signal & sensor.
02
Mid hold (100 mA–5 A)
0805–1206, power & logic.
03
High hold (5–100 A)
0612–2920 & radial, 48 V & motors.
04
AEC-Q200 automotive
Wide-temp, long life.
Polymeric PTC resettable fuses span hold current Ihold 10 mA–100 A, trip current slightly higher, rated voltage 6 V–600 V, in SMD 0603–2920 and radial leaded forms; automotive grades pass AEC-Q200.
| Dimension | Typical range | Note |
|---|---|---|
| Hold current | 10 mA–100 A | no trip in normal use |
| Trip current | 1.8–2.5× Ihold | trips on overcurrent |
| Voltage | 6–600 V | by bus |
| Package | SMD / radial | board mostly SMD |
| Grade | commercial / auto (AEC-Q200) | vehicle stricter |
Polymeric PTC resettable fuses span hold current Ihold 10 mA–100 A, trip current slightly higher, rated voltage 6 V–600 V, in SMD 0603–2920 and radial leaded forms; automotive grades pass AEC-Q200.
| Dimension | Typical range | Note |
|---|---|---|
| Hold current | 10 mA–100 A | no trip in normal use |
| Trip current | 1.8–2.5× Ihold | trips on overcurrent |
| Voltage | 6–600 V | by bus |
| Package | SMD / radial | board mostly SMD |
| Grade | commercial / auto (AEC-Q200) | vehicle stricter |
