SPD Tech Circuit Protection Devices & Solutions
中文

TVS — Typical Specifications

· 6 min
TVSTransient suppressorClampSignal protectionSpecifications

Mainstream commercial specifications, package forms and selection reference for TVS.

Low power (200–600 W)

Low power (200–600 W)

SOD/SMA, port & signal ESD/EOS.

02

Mid power (1.5–5 kW)

SMB/SMC, power and bus ports.

03

High power (30 kW+)

DO-214AB/SMC, board power clamping.

04

Low-cap (< 1 pF)

USB/HDMI/Ethernet, lower Cj better.

05

Multi-line arrays (2/4/6/8)

Differential buses, matched channels.

TVS diodes are specified by reverse standoff Vwm (3.3 V–400 V+), peak pulse power Ppp (200 W, 400 W, 600 W, 1500 W, 3000 W, 5000 W, up to 30 kW+ SMC/SMD); low-cap types Cj < 1 pF target USB/HDMI/Ethernet; multi-line arrays (2/4/6/8 lines) serve differential buses.

Dimension Typical range Note
Vwm standoff 3.3–400+ V slightly above working V
Ppp peak power 200 W–30 kW+ by port class
Vc clamp ratio of Vwm lower is better
Cj capacitance 0.2–2000 pF low for high speed
Package SOD/SMA/SMB/SMC/DFN arrays for multi-line

TVS diodes are specified by reverse standoff Vwm (3.3 V–400 V+), peak pulse power Ppp (200 W, 400 W, 600 W, 1500 W, 3000 W, 5000 W, up to 30 kW+ SMC/SMD); low-cap types Cj < 1 pF target USB/HDMI/Ethernet; multi-line arrays (2/4/6/8 lines) serve differential buses.

Dimension Typical range Note
Vwm standoff 3.3–400+ V slightly above working V
Ppp peak power 200 W–30 kW+ by port class
Vc clamp ratio of Vwm lower is better
Cj capacitance 0.2–2000 pF low for high speed
Package SOD/SMA/SMB/SMC/DFN arrays for multi-line