SPD Tech Circuit Protection Devices & Solutions
中文

GB/T 18802 and CQC Certification (China)

· 12 min
GB/T 18802CQCcertificationunit division

The GB/T 18802 family (.11-2020 power / .12 application / .21 telecom) and the CQC11-462111-2021 certification rules, unit division and filing essentials.

1. The GB/T 18802 family

GB/T 18802 is MOD of IEC 61643 and is the Chinese national product standard for low-voltage SPDs:

Part Corresponding IEC Scope
GB/T 18802.11-2020 IEC 61643-11:2011 Power-system SPD performance & tests (current)
GB/T 18802.12-2014 IEC 61643-12 Selection & application guide for LV distribution
GB/T 18802.21-2016 IEC 61643-21 Telecom & signalling network SPD performance & tests
PV / DC dedicated parts IEC 61643-31/-32 etc. SPDs for PV, DC systems

Adoption lag

National .11-2020 corresponds to IEC 61643-11:2011; IEC published the 2025 edition (-01/-11 split) which China has not yet adopted. For global platforms, evaluate per target market.

2. CQC certification

Domestic SPDs mostly use CQC voluntary certification (China Quality Certification Centre). The current rule for power SPDs:

  • Rule No.: CQC11-462111-2021 (replacing CQC11-462111-2016)
  • Product category: 123005
  • Certification mode: type test + initial factory inspection + post-certification surveillance
  • Certificate validity: 10 years (with a review requirement)
  • Base standards: GB/T 18802.11-2020 (power), GB/T 18802.21-2016 (telecom; YD/T 1235.2, YD/T 1542 also referenced)

3. Filing essentials

  1. Unit division: different applicants / manufacturers / producers, or different constructions / key components, usually form different certification units; variants within a unit need a difference statement.
  2. Key components: MOV wafers, thermal disconnectors, enclosures are managed as key parts — changes must be declared.
  3. Factory inspection: initial inspection + surveillance sampling (per Rule Table 7 items and quantities).
  4. Edition transition: after a new standard/rule is released there is a transition window; failure to convert in time leads to suspension and eventual revocation.

Certification ≠ selection

CQC certification proves the product meets the GB/T 18802 safety/performance baseline, but does not replace engineering selection. Uc, Up, In, Iimp for a specific project still need judgement against site conditions and the current standard.

4. Further reading


1. The GB/T 18802 family

GB/T 18802 is MOD of IEC 61643 and is the Chinese national product standard for low-voltage SPDs:

Part Corresponding IEC Scope
GB/T 18802.11-2020 IEC 61643-11:2011 Power-system SPD performance & tests (current)
GB/T 18802.12-2014 IEC 61643-12 Selection & application guide for LV distribution
GB/T 18802.21-2016 IEC 61643-21 Telecom & signalling network SPD performance & tests
PV / DC dedicated parts IEC 61643-31/-32 etc. SPDs for PV, DC systems

Adoption lag

National .11-2020 corresponds to IEC 61643-11:2011; IEC published the 2025 edition (-01/-11 split) which China has not yet adopted. For global platforms, evaluate per target market.

2. CQC certification

Domestic SPDs mostly use CQC voluntary certification (China Quality Certification Centre). The current rule for power SPDs:

  • Rule No.: CQC11-462111-2021 (replacing CQC11-462111-2016)
  • Product category: 123005
  • Certification mode: type test + initial factory inspection + post-certification surveillance
  • Certificate validity: 10 years (with a review requirement)
  • Base standards: GB/T 18802.11-2020 (power), GB/T 18802.21-2016 (telecom; YD/T 1235.2, YD/T 1542 also referenced)

3. Filing essentials

  1. Unit division: different applicants / manufacturers / producers, or different constructions / key components, usually form different certification units; variants within a unit need a difference statement.
  2. Key components: MOV wafers, thermal disconnectors, enclosures are managed as key parts — changes must be declared.
  3. Factory inspection: initial inspection + surveillance sampling (per Rule Table 7 items and quantities).
  4. Edition transition: after a new standard/rule is released there is a transition window; failure to convert in time leads to suspension and eventual revocation.

Certification ≠ selection

CQC certification proves the product meets the GB/T 18802 safety/performance baseline, but does not replace engineering selection. Uc, Up, In, Iimp for a specific project still need judgement against site conditions and the current standard.

4. Further reading